LearnTextiles

Lab-dip Preparation in Textile Industry

July 11, 2020 LearnTextiles 0

267

Lab-dip Preparation in Textile Industry Lab–dip can be described as one kind of swatch board containing buyers sample, shaded swatch & also fabric and all dyeing parameters including chemical names. Lab-dip machines are used in this operation. To produce a lab-dip at first a standard recipe of the given sample is produced by computer color […]

Dyeing

Objectives of a dyeing lab | Pantone book | Lab Dip development procedure

July 11, 2020 LearnTextiles 0

229

Objectives of a dyeing lab | Pantone book | Lab Dip development procedure LAB section Lab section in dyeing is the first major segment of a dyehouse despite of its size compared to the production floor. Lab is where the “lab dips” are prepared and the final recipes for bulk dyeing is constructed. A lab […]

Printing On Polyester Fabric With Disperse Dyes

May 12, 2020 LearnTextiles 0

207

Printing On Polyester Fabric With Disperse Dyes Introduction: Dyes are coloured, unsaturated organic chemical compounds capable of giving colour to a substrate (a textile), i.e. colouring or dyeing it. The term “disperse dye” have been applied to the organic colouring substances which are free from ionizing groups, are of low water solubility and are suitable […]

Apparel Engineering

Maintenance of Sewing Machines

May 6, 2020 LearnTextiles 0

Maintenance of Sewing Machines Maintenance : Maintenance is a procedure by means of which we can maintain active functioning in operation according to the behavior and utility of particular element. Maintenance can also be defined as the process of systematic activities done for keeping the m/c or equipment at the heat level for well run […]

Lab Reports

Maintenance | Maintenance of Machinery | Flow Chart of Maintenance

May 6, 2020 LearnTextiles 0

286

Maintenance | Maintenance of Machinery | Flow Chart of Maintenance Maintenance : Maintenance is a procedure by means of which we can maintain active functioning in operation according to the behavior and utility of particular element. Maintenance can also be defined as the process of systematic activities done for keeping the m/c or equipment at […]

Inventory Management

A Typical Knit Composite Garments Factory Inventory Management System

May 6, 2020 LearnTextiles 0

A Typical Knit Composite Garments Factory Inventory Management System Grey fabrics store: All the grey fabrics are stored in the fabric store, near the batch section. Different types of fabrics arc listed in the sheet according to the fabric types, quantity & consumer’s requirements. Fabrics GSM, shrinkage, diameter & other properties are also taken into […]

Inventory Management

Inventory Management in Textile Apparel Industry

May 6, 2020 LearnTextiles 0

476

Inventory Management in Textile Apparel Industry Inventory : Inventory is a raw materials work in process, component or finished parts; and finished products held in storage waiting use for sale or in the process manufacture. Inventory control means the accurate calculation and data of every type of raw materials, spares, finished goods in time to […]

Compliance-of-a-textile-factory2-300×100

Garment Factory Compliance

Compliance of a Garment Factory

May 6, 2020 LearnTextiles 0

139

Compliance of a Garment Factory Compliance Compliance means conformity of certain standard. PPC maintain a moderate working condition for their employees. Though it is well established project, there is some lacking of proper compliance issues. List of compliance Issues of a Garment Factory Here is the list of compliance in which some point is maintained […]

Textile Engineering

Typical Departments of a Knit Composite Textile Factory

May 4, 2020 LearnTextiles 0

Typical Departments of a Knit Composite Textile Factory To ensure smooth running of various activities in textile industries, below departments are available in any knit composite textile factory: 1 . Knitting department: Knitting Inspection 2 . Knit dyeing department: Batch section Store house for dyes & chemicals Dyeing Section Lab & QC Finishing 3. Yarn […]

Apparel Engineering

Application of Computer in Apparel Manufacturing

May 1, 2020 LearnTextiles 0

391

Application of Computer in Apparel Manufacturing Expt. no Experiment Name 01 Study on Lectra Modaris environment set up. 02 Study and practise on pattern design for a T-shirt by Lectra CAD system. 03 Study and practise on pattern grading for a T-shirt. 04 Study on marker making for a T-shirt by Lectra Diamino CAD system […]