Click Here to Download Free E-books

  1. Home
  2. Md Sohanur Rahman Sobuj

Md Sohanur Rahman Sobuj

Student of Bangladesh University of Textiles (BUTEX) Department: Apparel Engineering
S twist and Z twist
Textile Physics-1

Study of Twist | Twist in yarn | Introduction of twist in yarn

Md Sohanur Rahman Sobuj 5
17.76K
0shares Facebook Twitter LinkedIn Tumblr Digg Print Reddit Weibo Xing Blogger MySpace Study of Twist in spinning | Twist in yarn | Introduction of twist in yarn Definition of twist:   The term “twist” defines the helicoidal or spiral configuration organized by the rotation of a yarn or of a bundle of fibers around their […]
Read more
Flash-twist coiling method 1
Textile Testing & Quality Control-1

Drawing, Texturing, Intermingling and Heat setting Process

Md Sohanur Rahman Sobuj 1
14.08K
Man Made Fibre and Man Made Fibre Production - Manufactured (MF) fibers (formerly termed “man-made”) are formed from a suitable raw material as a thick, sticky liquid, which is “spun” or extruded through spinneret holes, forming streams that are solidified into fibers.
Read more
Fabric Structure
Fabric Engineering

Woven fabric Structure

Md Sohanur Rahman Sobuj 1
10.21K
The order of interlacement of warp and weft threads at right angles is known as structure of woven fabrics. The interlooping system of yarns is known as structure for knit fabrics. Classification of woven fabric structure: Simple structure and Compound Structure.Methods of fabric representation:❶Warp overlap in which warp is above weft and ❷Weft overlap in which weft is above warp
Read more
Yarn Count Conversion Table
Fabric Engineering

Yarn count conversion and yarn count converter

Md Sohanur Rahman Sobuj 1
4.01K
Yarn Count Conversion Conversion from direct to direct system Conversion from indirect to indirect system Conversion from direct to indirect system Conversion from indirect to direct system
Read more
Weft Way Broken twill
Fabric Engineering

Broken and Rearranged Twill

Md Sohanur Rahman Sobuj 0
5.10K
Broken twill is formed by breaking the twill line of basic twill. Normally straight draft is used to produce this weave. Rearranged twill is produced by the rearrangement or transposition of the original order of the threads in the regular basic twill.
Read more
Plied Yarn Contraction | Relation Between Yarn Count and Diameter |direct count system | textile study center | textilestudycenterc.om
Fabric Engineering

Relation Between Yarn Count and Diameter & count calculation for ply yarn

Md Sohanur Rahman Sobuj 0
8.18K
Normally, when two single yarns are twisted together one should expect some contraction or some increase in length depending on the twisting direction. A contraction will result in a yarn slightly coarser than the estimated value. In order to correct for this difference, typically 5% to 10% contraction or extension should be accounted for.
Read more
Stitched matt
Fabric Engineering

Derivatives of Plain Weave

Md Sohanur Rahman Sobuj 0
12.40K
There are two types of derivatives : Rib and Matt. In rib weave, it produces rib or cord effect in warp/weft direction. Used as grosgrain cloth, mattress cloth,hair cords, blankets etc. Matt is constructed by extending the plain weave both vertically and horizontally. Matt weave finds extensive uses for a great variety of fabrics such as dress materials, shirtings, sail cloth, duck cloth etc.
Read more
Wet spinning process Melt Spinning
Introduction to man made fibre

Melt Spinning , Dry spinning and Wet Spinning Method

Md Sohanur Rahman Sobuj 0
40.69K
Man-made fibers are manufactured by spinning the polymer. There are three major types of spinning process. They are- █ Melt Spinning (It is used for polymers that can be melted easily.) █ Dry Spinning (It involves dissolving the polymer into a solution that can be evaporated.) █ Wet Spinning (It is used when the solvent can’t be evaporated and must be removed by chemical means.)
Read more
The twisted -roving system
Short staple spinning - 1

Speed Frame and function of speed frame

Md Sohanur Rahman Sobuj 3
18.41K
The output from the draw frame is fed into the roving frame (also called ‘speed frame or simplex machine or flyer frame‘) where the linear density of sliver is reduced by drafting and the resultant product is called the roving. After the drafting operation, the roving is wound on the bobbin. During winding, a little amount of twist is imparted to the roving.
Read more
twill angle
Fabric Engineering

Twill & Angle of Twill Weave

Md Sohanur Rahman Sobuj 0
4.51K
A twill weave is characteristics by diagonal ribs (twill lines) on the face of the fabric. These twill lines are produce by letting all warp ends interlace in the same way but displaing the interlaceing points of each end by one pick relative to that of the previous end while the plain weave can only be woven in one form, there exit several options with regrad to twills.
Read more
Close

Share this video