Md Sohanur Rahman Sobuj

4-4-double-apron-drafting-system-Drafting system of roving frame

Drafting system of roving frame I Draft Distribution of Speed or roving Frame |The simplex/roving frame is a necessary evil

June 28, 2015 Md Sohanur Rahman Sobuj 2

12.39K

The drafting section of the roving frame may be 3 over 3 or 4 over 4 with or without apron roller arrangement. Only the 3-over-3 or 4 over 4 roller with double apron drafting system are still to be found in modern machines offered by manufacturers. In general 3/3 drafting system is used, but for higher draft applications 4/4 drafting system is used.

Fabric Engineering

Yarn Numbering System

June 26, 2015 Md Sohanur Rahman Sobuj 0

44.69K

Yarn number is a measure of the fineness or size of a yarn expressed either as mass per unit length or length per unit. Yarn Count and Yarn Size are synonymous with Yarn Number.There are two systems of expressing yarn number or yarn count. ❶ Direct yarn numbering system (mass/unit length) ❷ Indirect yarn numbering system (length/unit mass)

Fabric Engineering

Man-Made Fibers & Classification of Man-Made Fibers

June 26, 2015 Md Sohanur Rahman Sobuj 0

15.06K

In a very general way, a fiber is defined as any product capable of being woven or otherwise made into a fabric. It may be thought of as the smallest visible unit of textile production. Fibers may be agricultural products (such as cotton or wool) or units (such as nylon or polyester) manufactured in a chemical plant. Fibers than serve as the raw material in the next stage of textile manufacturing.

Fabric Engineering

Speed Frame Machine Components

June 23, 2015 Md Sohanur Rahman Sobuj 4

5.37K

Top rollers are held strictly parallel to and in perfect alignment with bottom rollers.//The bottom rollers of speed frame exercise immense inﬂuence on the quality of roving.//The flyer is a special component of the roving frame that helps to insert twist in the roving. The ﬂyer speeds employed normally range from about 1000 to 1400 rpm. The ﬂyers’ special shape offers less air resistance, preventing roving breakages.

Fabric Engineering

Plain Weave Definition and Plain Weave Classification

June 20, 2015 Md Sohanur Rahman Sobuj 1

6.35K

A weave in which there are 2 ends and 2 picks in a repeat is called a plain weave. It has the smallest repeat 2 x2. Classification of plain weave: Approximately square cloth, Warp face cloth, Weft face twill, Balanced cloth, Unbalanced cloth.

Fabric Engineering

Twist Measurement in Yarn

June 7, 2015 Md Sohanur Rahman Sobuj 0

12.25K

The most obvious way to measure the number of twists per unit length of yarn is simply to untwist a known length of the yarn and check visually to see whether the twist has been completely removed.

Fabric Engineering

Basic Element of Woven Design (Drafting, Lifting & Denting Plan)

June 7, 2015 Md Sohanur Rahman Sobuj 0

19.71K

The process of drawing the warp yarn through the eye of heald frames according to design is called drafting, and the plan which indicates how drafting needs to be done is called drafting plan. It also denotes the number of heald shaft required for a given weave repeat

Fabric Engineering

Zig-zag and Herringbone Twill Weave

April 28, 2015 Md Sohanur Rahman Sobuj 0

12.96K

Zigzag twill are those in which the direction of twill is frequently reversed at suitable intervals either across the width or along the length. Herringbone twill are those in which the direction of twill is frequently reversed at suitable intervals either across the width or along the length but not as zig-zag twill and weft yarns floating condition is reversed of the previous yarn.

Fabric Engineering

Diamond Design | Diaper Design

April 25, 2015 Md Sohanur Rahman Sobuj 0

8.69K

Diamond design is constructed on the principle of zig-zag twill.Pointed draft is used to make diamond design.Diaper design is constructed on the principle of herringbone twill.Straight or broken draft is used to make diamond design.

Fabric Engineering

Classification of Twill Weave

April 24, 2015 Md Sohanur Rahman Sobuj 0

4.57K

Classification of twill weave: S twill, Z twill, Warp way twill, Weft way twill, Simple twill, expanded twill, Multiple Twill. Derivarives of twill: Zig-zag, Harringbone, Diamond,Diaper, Broken, Rearranged,Shaded, Steped, Elongated, Combined and Curved twill.