Noil consists of shorter fibers and neps. The amount of noil removed in the combing process may be varied to suit the circumstances and is usually expressed in percentage based on the original weight of laps fed into the machine.
Production Calculation of Lap Former Machine
Part 1: Basic Concept of Combing Process | Types of Comber Machine Part 2: Lap Preparation | Sliver Lap Machine | Ribbon Lap Machine Part 3: Production Calculation of Lap Former Machine Part 4: Different Action of Combing Machine | Comber Waste in a Cotton Comber | Material Passage Diagram of Comber Part 5: Production […]
Production Calculation of Comber Machine
Part 1: Basic Concept of Combing Process | Types of Comber Machine Part 2: Lap Preparation | Sliver Lap Machine | Ribbon Lap Machine Part 3: Production Calculation of Lap Former Machine Part 4: Different Action of Combing Machine | Comber Waste in a Cotton Comber | Material Passage Diagram of Comber Part 5: Production […]
Viscose Fiber | Viscose Rayon Production | Properties of Viscose Rayon
Viscose Fiber | Viscose Rayon Production | Flow Chart of Viscose Rayon Manufacturing | Properties of Viscose Rayon | Trade Name of Viscose | End Use of Viscose Rayon Viscose is a man-made, natural polymeric cellulose or regenerated cellulose filament or staple fiber. Viscose regenerated cellulose is obtained by the viscoseprocess. The name viscose was derived from the […]
Properties of Cotton Fibers
Properties of Cotton Fibers Considered by Cotton Spinners Spinning Technology for Cotton Fibre: Flow chart of carded yarn production: Input Machine Output Bale Blow Room Card mat Card mat Carding Card sliver Card sliver Breaker draw frame Drawn sliver Drawn sliver Finisher draw frame Drawn sliver Drawn sliver Simplex Roving Roving Ring Yarn Flow chart […]
Determination Of Relative Humidity By Wet And Dry Bulb Hygrometer
Name of Expt.: Determination Of Relative Humidity By Wet And Dry Bulb Hygrometer. Objects : To find out the temperature and relative humidity of lab room Theory: Relative humidity is the ratio of actual vapour pressure to the saturated vapour pressure of the same temperature. Expressed as percentage. Relative humidity = actual vapour pressure/standard vapour […]
Introduction to Desizing of Warp Yarns
Introduction to Sizing Introduction to Desizing of Warp Yarns Desizing : Desizing is the process in which the size applied to the warp yarn before weaving is removed to facilitate the penetration of dyes and chemicals in the subsequent wet processing operations. In the process of desizing, not only sizing agents, but also some natural […]
Introduction to Sizing of warp yarns
Introduction to Desizing of Warp Yarns Introduction to Sizing of Warp Yarns Textile Sizing : The process of applying a protective adhesive coating upon the yarn surface is called textile sizing. This is the most important operation to attain maximum weaving efficiency specially for blended & filament yarns. Different types of sizing are used like […]
Reflection and Luster
When light falls on the fiber, part of light is reflected. The luster of a single fiber is determined by the total visual appearance of these reflections from the fiber surface. It is directly proportional to the amount of light reflected by a fiber. Silk fibers has a high luster and cotton has low luster.
Swelling of fibre and Types of swelling
Dimensionally changes due to absorbing water or moisture by any fiber is known as swelling. When fiber absorbs water they change dimensionally. Swelling occurs in transversely (width wise) and axially (Lengthwise). It may be expressed in terms of the increase in diameter, area, length or volume.